R2511-HP MSR Router Series WLAN Command Reference(V5)

39
<Sysname> system-view
[Sysname] wlan service-template 1 clear
[Sysname-wlan-st-1] ssid firstfloor
wlan broadcast-probe reply
Use wlan broadcast-probe reply to enable the AP to respond to the probe requests without SSID.
Use undo wlan broadcast-probe reply to remove the configuration to cause the AP to only respond to
probe requests that carry the specified SSID.
Syntax
wlan broadcast-probe reply
undo wlan broadcast-probe reply
Default
An AP responds to probe requests without SSID.
Views
System view
Examples
# Enable the AP to respond to probe requests without SSID.
<Sysname> system-view
[Sysname] wlan broadcast-probe reply
wlan client idle-timeout
Use wlan client idle-timeout to specify the client idle timeout.
Use undo wlan client idle-timeout to restore the default.
Syntax
wlan client idle-timeout interval
undo wlan client idle-timeout
Default
The client idle timeout is 3600 seconds.
Views
System view
Default command level
2: System level
Parameters
interval: Maximum interval for which the link between the AP and a client ( power-save or awake ) can
be idle. The value is in the range of 60 to 86400 seconds.
Usage guidelines
If the AP does not receive any data from a client within the client idle timeout interval, it removes the client
from the network.