R2511-HP MSR Router Series WLAN Command Reference(V5)

44
9 36 5 5 11 0 0
10 48 5 5 10 0 0
11 54 5 5 11 0 0
Table 11 RFPing operation results
Field Descri
p
tion
No./MCS
• The No. field is displayed for an RFPing operation to a non 802.11n client,
indicating the rate index of the client.
• The MCS field is displayed for an RFPing operation to an 802.11n client,
indicating the MCS value of the client.
Rate(Mbps) Rate for the radio interface to send ping packets.
TxCnt Number of ping packets sent by the radio interface.
RxCnt Number of ping packets received by the radio interface from the client.
RSSI Received signal strength indicator (RSSI).
Retries Number of retries when the radio interface failed to send ping packets.
RTT(ms)
RTT from the time the radio interface sends a ping packet to the time it receives a
response from the client.
wlan service-template
Use wlan service-template to create a service template and enter service template view. If the service
template exists, you can directly enter service template view.
Use undo wlan service-template to delete the service template and related configurations. If the specified
service template is mapped to a radio, it cannot be directly deleted before it is un-mapped.
Syntax
wlan service-template service-template-number { clear | crypto }
undo wlan service-template service-template-number
Default
No service template is configured.
Views
System view
Default command level
2: System level
Parameters
service-template-number: Number of the service template, in the range of 1 to 1024.
clear: Sets the current service template type to clear, which means data will be sent in clear text after the
template is mapped to an AP.
crypto: Sets the current service template type to crypto, which means data will be sent in cipher text after
the template is mapped to an AP.