R2511-HP MSR Router Series WLAN Command Reference(V5)

45
Usage guidelines
You cannot change an existing service template to another type. To do so, delete the existing service
template and configure a new service template with the new type.
Examples
# Create service template 1.
<Sysname> system-view
[Sysname] wlan service-template 1 crypto
[Sysname-wlan-st-1]
Workgroup bridge configuration commands
client-mode authentication-method
Use client-mode authentication-method to configure the authentication method for the workgroup
bridge.
Use undo client-mode authentication-method to restore the default.
Syntax
client-mode authentication-method { open-system | shared-key | wpa2-psk }
undo client-mode authentication-method
Default
The authentication method for the workgroup bridge is open system authentication.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
open-system: Specifies the open system authentication.
shared-key: Specifies the shared-key authentication.
wpa2-psk: Specifies the WPA2-PSK authentication.
Examples
# Configure the authentication method for the workgroup bridge as shared-key authentication.
<Sysname> system-view
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] client-mode authentication-method shared-key
client-mode cipher-suite
Use client-mode cipher-suite to select the cipher suite and pre-shared key for the workgroup bridge.
Use undo client-mode cipher-suite to restore the default.