R2511-HP MSR Router Series WLAN Command Reference(V5)

47
Views
WLAN radio interface view
Default command level
2: System level
Examples
# Connect the AP in client mode to the wireless network.
<Sysname> system-view
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] client-mode connect
client-mode disconnect
Use client-mode disconnect to disconnect the workgroup bridge from the wireless network.
Syntax
client-mode disconnect
Views
WLAN radio interface view
Default command level
2: System level
Examples
# Disconnect the workgroup bridge from the wireless network.
<Sysname> system-view
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] client-mode disconnect
client-mode interface wlan-bss
Use client-mode interface wlan-bs to configure the current radio interface as a workgroup bridge and
bind the radio interface to a WLAN-BSS interface.
Use undo client-mode interface wlan-bss to disable workgroup bridge mode for the radio interface and
remove the binding between the radio interface and the WLAN-BSS interface.
Syntax
client-mode interface wlan-bss bss-id
undo client-mode interface wlan-bss
Default
Workgroup bridge mode is disabled.
Views
WLAN radio interface view
Default command level
2: System level