R2511-HP MSR Router Series WLAN Command Reference(V5)

48
Parameters
bss-id: WLAN-BSS interface number.
Usage guidelines
Workgroup bridge related configurations can be applied only when workgroup bridge mode is enabled.
When the workgroup bridge mode is disabled, all workgroup bridge related configurations are
automatically removed.
Examples
# Enable workgroup bridge mode for the radio interface and bind the radio interface to WLAN-BSS 1.
<Sysname> system-view
[Sysname] interface wlan-bss 1
[Sysname-WLAN-BSS1] quit
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] client-mode interface wlan-bss 1
client-mode ssid
Use client-mode ssid to configure the SSID for the workgroup bridge .
Use undo client-mode ssid to disable the SSID for the workgroup bridge.
Syntax
client-mode ssid ssid
undo client-mode ssid
Default
No SSID is specified for the workgroup bridge.
Views
WLAN radio interface view
Default command level
2: System level
Parameters
ssid: Associated SSID, a case-sensitive string of 1 to 32 characters.
Examples
# Configure the SSID for the workgroup bridge as ChinaNet-ABC.
<Sysname> system-view
[Sysname] interface wlan-radio 2/0
[Sysname-WLAN-Radio2/0] client-mode ssid ChinaNet-ABC
display wlan client-mode radio
Use display wlan client-mode radio to display the configuration and connection status for the radios in
workgroup bridge mode.
Syntax
display wlan client-mode radio [ | { begin | exclude | include } regular-expression ]