R2511-HP MSR Router Series WLAN Command Reference(V5)

1
WLAN interface configuration commands
The terms AP and fat AP in this document refer to MSR900, MSR93X (JG512A, JG519A and JG597A),
and MSR20-1X routers with IEEE 802.11b/g and MSR series routers installed with a SIC WLAN module.
bandwidth
Use bandwidth to set the expected bandwidth for an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
WLAN BSS interface view, WLAN Ethernet interface view, WLAN radio interface view
Default command level
2: System level
Parameters
bandwidth-value: Expected bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
Obtain the expected bandwidth by using a third-party software to query MIB node ifspeed.
The network management station uses the expected bandwidth to monitor the interface bandwidth and
does not affect the actual interface bandwidth.
Examples
# Set the expected bandwidth of a WLAN BSS interface to 10000 kbps.
<Sysname> system-view
[Sysname] interface wlan-bss 1
[Sysname-WLAN-BSS1] bandwidth 10000
default
Use default to restore the default settings for an interface.
Syntax
default
Views
WLAN BSS interface view, WLAN Ethernet interface view, WLAN radio interface view
Default command level
2: System level