R2511-HP MSR Router Series WLAN Command Reference(V5)

55
Field Descri
p
tion
Mandatory Rates that at least one of the APs is required to support.
Supported Additional rates supported by the client or AP.
Disabled Rates at which an AP does not transmit data.
11g Protection 802.11g protection: Enabled or Disabled.
11g Protection Mode 802.11g protection mode: CTS-to-Self or RTS/CTS.
11n Protection Mode 802.11n protection mode: CTS-to-Self or RTS/CTS.
11h Configuration 802.11h configuration.
Spectrum Management Enabled or disabled.
Power Constraint (dBm)
Power constraint for all 802.11a radios. This field is not supported
and displays 0.
Channel Set All or Non-dot11h.
dot11b
Use dot11b to configure 802.11b rates.
Use undo dot11b to restore the default rates.
Syntax
dot11b { disabled-rate | mandatory-rate | multicast-rate | supported-rate } rate-value
undo dot11b { disabled-rate | mandatory-rate | multicast-rate | supported-rate }
Views
WLAN RRM view
Default command level
2: System level
Parameters
disabled-rate: Specifies disabled rates.
mandatory-rate: Specifies mandatory rates.
multicast-rate: Specifies multicast rates, at which the AP send multicasts to clients. Multicasts rates must
be selected from the mandatory rates.
supported-rate: Specifies supported rates.
rate-value: The following rates can be specified.:
• 1 Mbps
• 2 Mbps
• 5.5 Mbps
• 11 Mbps
Examples
# Configure 802.11b rates (disabled: 1; multicast: 11; supported: 11) .
<Sysname> system-view