R2511-HP MSR Router Series WLAN Command Reference(V5)

57
Default command level
2: System level
Parameters
disabled-rate: Specifies disabled rates.
mandatory-rate: Specifies mandatory rates.
multicast-rate: Specifies multicast rates, which are the rates at which the AP send multicasts to clients.
Multicasts rates must be selected from the mandatory rates.
supported-rate: Specifies supported rates.
rate-value: The following rates can be specified.
• 1 Mbps
• 2 Mbps
• 5.5 Mbps
• 6 Mbps
• 9 Mbps
• 11 Mbps
• 12 M b p s
• 18 M b ps
• 24 Mbps
• 36 Mbps
• 48 Mbps
• 54 Mbps
Examples
# Configure 802.11g rates (disabled: 2, 36; multicast: 11; supported: 54).
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] dot11g disabled-rate 2 36
[Sysname-wlan-rrm] dot11g multicast-rate 11
[Sysname-wlan-rrm] dot11g supported-rate 54
dot11g max-bandwidth
Use dot11g max-bandwidth to configure the maximum 802.11g bandwidth.
Use undo dot11g max-bandwidth to restore the default.
Syntax
dot11g max-bandwidth 11g-bandwidth
undo dot11g max-bandwidth
Default
The maximum 802.11g bandwidth 30000 kbps.
Views
WLAN RRM view