R2511-HP MSR Router Series WLAN Command Reference(V5)

58
Default command level
2: System level
Parameters
11g-bandwidth: Maximum 802.11g bandwidth in kbps. It is in the range of 16 to 30000 kbps.
Examples
# Configure the maximum 802.11g bandwidth as 6000 kbps.
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] dot11g max-bandwidth 6000
dot11g protection enable
Use dot11g protection enable to enable 802.11g protection.
Use undo dot11g protection enable to restore the default.
Syntax
dot11g protection enable
undo dot11g protection enable
Default
802.11g protection is disabled.
Views
WLAN RRM view
Default command level
2: System level
Examples
# Enable 802.11g protection.
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] dot11g protection enable
dot11g protection-mode
Use dot11g protection-mode to configure the 802.11g protection mode.
Use undo dot11g protection-mode to restore the default.
Syntax
dot11g protection-mode { cts-to-self | rts-cts }
undo dot11g protection-mode
Default
The 802.11g protection mode is CTS-to-Self.
Views
WLAN RRM view