R2511-HP MSR Router Series WLAN Command Reference(V5)

59
Default command level
2: System level
Parameters
cts-to-self: Specifies the Clear to Send (CTS)-to-Self mode.
rts-cts: Specifies the Request to Send (RTS)/CTS mode.
Examples
# Configure the 802.11g protection mode as RTS/CTS.
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] dot11g protection-mode rts-cts
dot11n mandatory maximum-mcs
Use dot11n mandatory maximum-mcs to specify the maximum MCS index for 802.11n mandatory rates.
Use undo dot11n mandatory maximum-mcs to remove the configuration.
Syntax
dot11n mandatory maximum-mcs index
undo dot11n mandatory maximum-mcs
Default
No maximum MCS index is specified for 802.11n mandatory rates.
Views
RRM view
Default command level
2: System level
Parameters
index: Specifies the maximum MCS index for 802.11n mandatory rates, in the range of 0 to 76.
Usage guidelines
If you configure the client dot11n-only command for a radio, you must configure the maximum MCS
index for 802.11n mandatory rates.
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93X
MSR20-1
X
MSR20 MSR30 MSR50
MSR100
0
dot11n
mandatory
maximum-mcs
No
Available
for
JG512A,
JG519A
and
JG597A
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLAN
module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n