R2511-HP MSR Router Series WLAN Command Reference(V5)

60
Examples
# Specify the maximum MCS index for 802.11n mandatory rates as 15.
<sysname> system-view
[sysname] wlan rrm
[sysname-wlan-rrm] dot11n mandatory maximum-mcs 15
dot11n max-bandwidth
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93X
MSR20-1
X
MSR20 MSR30 MSR50
MSR100
0
dot11n
max-bandwidt
h
No
Available
for
JG512A,
JG519A
and
JG597A
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Use dot11n max-bandwidth to configure the maximum 802.11n bandwidth.
Use undo dot11n max-bandwidth to restore the default.
Syntax
dot11n max-bandwidth 11n-bandwidth
undo dot11n max-bandwidth
Default
The maximum 802.11n bandwidth is 180000 kbps.
Views
WLAN RRM view
Default command level
2: System level
Parameters
11a-bandwidth: Maximum 802.11n bandwidth in the range of 16 to 180000 kbps.
Examples
# Configure the maximum 802.11n bandwidth as 6000 kbps.
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] dot11n max-bandwidth 6000
dot11n multicast-rate
Use dot11n multicast-rate to specify the maximum MCS index for 802.11n multicast rates.