R2511-HP MSR Router Series WLAN Command Reference(V5)

63
Use undo dot11n protection-mode to restore the default.
Syntax
dot11n protection-mode { cts-to-self | rts-cts }
undo dot11n protection-mode
Default
The 802.11n protection mode is CTS-to-Self.
Views
WLAN RRM view
Default command level
2: System level
Parameters
cts-to-self: Specifies the Clear to Send (CTS)-to-Self mode.
rts-cts: Specifies the Request to Send (RTS)/CTS mode.
Examples
# Configure the 802.11n protection mode as RTS/CTS.
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] dot11n protection-mode rts-cts
dot11n support maximum-mcs
Use dot11n support maximum-mcs to specify the maximum MCS index for 802.11n supported rates.
Use undo dot11n support maximum-mcs to restore the default.
Syntax
dot11n support maximum-mcs index
undo dot11n support maximum-mcs
Default
The maximum MCS index for 802.11n supported rates is 76.
Views
RRM view
Default command level
2: System level
Parameters
index: Specifies the maximum MCS index for 802.11n supported rates, in the range of 0 to 76.
Usage guidelines
The specified maximum MCS index for 802.11n supported rates must be no less than the specified
maximum MCS index for 802.11n mandatory rates.
The following matrix shows the command and router compatibility: