R2511-HP MSR Router Series WLAN Command Reference(V5)

64
Command
MSR90
0
MSR93X
MSR20-1
X
MSR20 MSR30 MSR50
MSR100
0
dot11n
support
maximum-mcs
No
Available
for
JG512A,
JG519A
and
JG597A
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Only
available
for routers
with a
SIC-WLA
N module
that
supports
802.11n
Examples
# Specify the maximum MCS index for 802.11n supported rates as 25.
<sysname> system-view
[sysname] wlan rrm
[sysname-wlan-rrm] dot11n support maximum-mcs 25
scan report-interval
Use scan report-interval to set the scan report interval.
Use undo scan report-interval to restore the default.
Syntax
scan report-interval seconds
undo scan report-interval
Default
The scan report interval is 10 seconds.
Views
WLAN RRM view
Default command level
2: System level
Parameters
seconds: Interval for sending scan reports to the AC, in the range of 5 to 120 seconds.
Examples
# Set the scan report interval to 20 seconds.
<Sysname> system-view
[Sysname] wlan rrm
[Sysname-wlan-rrm] scan report-interval 20
scan type
Use scan type to set the scan type.
Use undo scan type to restore the default.