R2511-HP MSR Router Series WLAN Command Reference(V5)

71
wep default-key
Use wep default-key to configure the WEP default key.
Use undo wep default-key to delete the configured WEP default key.
Syntax
wep default-key key-index { wep40 | wep104 | wep128} { pass-phrase | raw-key } [ cipher | simple ]
key
undo wep default-key key-index
Default
The WEP default key index number is 1.
Views
Service template view
Default command level
2: System level
Parameters
key-index: The key index values can be:
1: Configures the 1st WEP default key.
2: Configures the 2nd WEP default key.
3: Configures the 3rd WEP default key.
4: Configures the 4th WEP default key.
wep40: Indicates the WEP40 key option.
wep104: Indicates the WEP104 key option.
wep128: Indicates the WEP128 key option.
pass-phrase: Inputs a character-string pre-shared key.
raw-key: Inputs a hexadecimal-string pre-shared key.
cipher: Sets a ciphertext key.
simple: Sets a plaintext key. This key will be saved in cipher text for security purposes.
string-key: Specifies the key string. The length of a ciphertext key is in the range of 24 to 88 characters.
If neither cipher nor simple is specified, you set a plaintext key string. The length of a plaintext key
depends on the key options selected:
• For wep40 pass-phrase, the key length is 5 alphanumeric characters.
• For wep104 pass-phrase, the key length is 13 alphanumeric characters.
• For wep128 pass-phrase, the key length is 16 alphanumeric characters.
• For wep40 raw-key, the key length is a 10-digit hexadecimal number.
• For wep104 raw-key, the key length is a 26-digit hexadecimal number.
• For wep128 raw-key, the key length is a 32-digit hexadecimal number.
Usage guidelines
When security IE is configured, WEP default key 1 is not allowed for configuration.