R2511-HP MSR Router Series WLAN Command Reference(V5)

74
Views
System view
Default command level
2: System level
Usage guidelines
This view enables you to configure WLAN IDS parameters such as scan parameters and device lists.
Examples
# Enter WLAN IDS view.
<Sysname> system-view
[Sysname] wlan ids
[Sysname-wlan-ids]
wlan work-mode monitor
Use wlan work-mode monitor to configure the AP to operate in monitor mode.
Use undo wlan work-mode monitor to restore the default.
Syntax
wlan work-mode monitor
undo wlan work-mode monitor
Default
The AP operates in normal mode to provide WLAN services.
Views
System view
Default command level
2: System level
Usage guidelines
If the AP operates in monitor mode, the command is invisible.
Before you change the operating mode of the AP, make sure the radios are disabled. Otherwise, you
cannot change the operating mode.
If the AP operates in monitor mode, the AP can only operate as a monitor AP and cannot operate as an
access AP, and cannot provide WLAN services.
Examples
# Set the monitor operation mode for the AP.
<Sysname> system-view
[Sysname] wlan work-mode monitor