R2511-HP MSR Router Series WLAN Command Reference(V5)

4
PVID: 1
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Last clearing of counters: Never
Table 1 Command output
Field Descri
p
tion
WLAN-BSS1 current state Physical link state of a WLAN BSS interface.
IP Packet Frame Type Output frame encapsulation type.
Hardware Address MAC address of output frames.
Description Description of the interface.
PVID Default VLAN ID of the interface.
Port link-type Port link type, which can be access or hybrid.
Tagged VLAN ID
VLANs whose packets are sent through the port with VLAN tag
kept.
Untagged VLAN ID
VLANs whose packets are sent through the port with VLAN tag
stripped off.
Last clearing of counters: Never
Time when the reset counts interface command was last used to
clear statistics on the interface. Never indicates that the reset
counts interface command was never used after the device was
started.
display interface wlan-ethernet
Use display interface wlan-ethernet to display information about a WLAN Ethernet interface.
Syntax
display interface [ wlan-ethernet ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface wlan-ethernet interface-number [ brief ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Specifies a WLAN Ethernet interface by its number.
brief: Displays brief interface information. If you do not provide this keyword, the command displays
detailed interface information.
down: Displays down interface information and the cause. If you do not provide this keyword, the
command output is not filtered based on the down interface status.