R2511-HP MSR Router Series WLAN Command Reference(V5)

87
display wlan client-rate-limit
Use display wlan client-rate-limit service-template to display WLAN service-based client rate limiting
information.
Syntax
display wlan client-rate-limit service-template [ service-template-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
service-template service-template-number: Specifies a service template by its number. If you do not
specify a service template, this command displays service-based client rate limiting information of all
service templates.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display WLAN service-based client rate limiting information.
<Sysname> display wlan client-rate-limit service-template
Client Rate Limit
--------------------------------------------------------------------------------
Service Template Direction Mode CIR(kbps)
--------------------------------------------------------------------------------
1 Inbound Dynamic 1000
2 Outbound Static 150
3 Inbound Static 300
--------------------------------------------------------------------------------
Table 20 Command output
Field Descri
p
tion
Service Template Service template number.
Direction
Rate-limited direction:
• Inbound.
• Outbound.
Mode
Rate limiting mode:
• Dynamic (shared bandwidth)
• Static (exclusive bandwidth)