R2511-HP MSR Router Series WLAN Configuration Guide(V5)

18
Ste
p
Command Remarks
4. Map a service template to the
radio.
service-template
service-template-number interface
wlan-bss interface-number
Optional.
You can map multiple service
templates to the radio.
If you use the WLAN BSS interface
together with the IMC binding
service, make sure the interface
number of the WLAN BSS interface
is no more than 31.
For more information about IMC,
see HP Intelligent Management
Center Getting Started Guide.
Enabling a radio
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter radio interface view.
interface wlan-radio
interface-number
N/A
3. Enable the radio.
undo shutdown
Optional.
By default, the radio is disabled.
Displaying and maintaining WLAN access
You can use the wlan link-test command to perform a Radio Frequency Ping (RFPing) operation to a client.
The operation results show information about signal strength and RTT between the AP and the client.
Task Command Remarks
Display WLAN client
information.
display wlan client { interface
wlan-radio [ radio-number ] |
mac-address mac-address |
service-template
service-template-number } [ verbose ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display WLAN service template
information.
display wlan service-template
[ service-template-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display WLAN service template
information or connection
history information.
display wlan statistics
service-template
service-template-number
[ connect-history ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.