R2511-HP MSR Router Series WLAN Configuration Guide(V5)

20
Ste
p
Command Remarks
2. Create a WLAN-BSS interface
and enter its view.
interface wlan-bss wlan-bss N/A
3. Quit to user view.
quit N/A
4. Enter radio interface view.
interface wlan-radio
interface-number
N/A
5. Configure the radio as a
workgroup bridge and bind
the WLAN-BSS interface to
the specified radio.
client-mode interface wlan-bss
wlan-bss
By default, workgroup bridge
mode is disabled.
Connecting the workgroup bridge to the wireless network
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a WLAN-BSS interface
and enter its view.
interface wlan-bss wlan-bss N/A
3. Quit to user view.
quit N/A
4. Enter radio interface view.
interface wlan-radio
interface-number
N/A
5. Configure the authentication
method for the workgroup
bridge.
client-mode authentication-method
{ open-system | shared-key |
wpa2-psk }
Optional.
By default, open system
authentication is used.
6. Configure the cipher suite and
pre-shared key for the
workgroup bridge.
client-mode cipher-suite { ccmp |
tkip | { wep40 | wep104 |
wep128 } [ key-id key-id ] } key
[ cipher | simple ] key
Optional.
By default, no cipher suite or
encryption key is configured.
7. Configure the associated SSID
for the workgroup bridge.
client-mode ssid ssid
By default, no associated SSID is
configured.
8. Connect the workgroup
bridge mode to the wireless
network.
client-mode connect Optional.
9. Disconnect the workgroup
bridge from the wireless
service.
client-mode disconnect Optional.
Displaying and maintaining workgroup bridge
Task Command Remarks
Display workgroup bridge
configuration and connection
status.
display wlan client-mode radio [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.