R2511-HP MSR Router Series WLAN Configuration Guide(V5)

21
Task Command Remarks
Display the wireless services
scanned by the workgroup bridge
and the signal quality.
display wlan client-mode ssid
[ ssid ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
WLAN access configuration examples
WLAN access configuration example
Network requirements
As shown in Figure 7, enable the client to access the internal network resources at any time. The AP
provides a plain-text wireless access service with SSID service. 802.11g is adopted.
Figure 7 Network diagram
Configuration procedure
1. Configure the fat AP:
# Create a WLAN BSS interface.
<AP> system-view
[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Configure a clear type WLAN service template, with no authentication.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid abc
[AP-wlan-st-1] authentication-method open-system
[AP-wlan-st-1] service-template enable
[AP-wlan-st-1] quit
# Bind WLAN-Radio 2/0 to service template 1 and WLAN-BSS 1.
[AP] interface WLAN-Radio 2/0
[AP-WLAN-Radio2/0] radio-type dot11g
[AP-WLAN-Radio2/0] channel 1
[AP-WLAN-Radio2/0] service-template 1 interface wlan-bss 1
2. Verify the configuration:
{ The clients can associate with the APs and access the WLAN.
{ You can use the display wlan client command to view the online clients.
802.11n configuration example
The following matrix shows the feature and router compatibility:
LAN Segment