R2511-HP MSR Router Series WLAN Configuration Guide(V5)

22
Feature MSR900 MSR93X MSR20-1X MSR20 MSR30 MSR50
802.11n No
Available for
JG512A,
JG519A and
JG597A
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Network requirements
As shown in Figure 8, deploy an 802.11n network to provide high bandwidth access for multi-media
applications. The AP provides a plain-text wireless service with SSID service. 802.11gn is adopted to
inter-work with the existing 802.11g network and protect the current investment.
Figure 8 Network diagram
Configuration procedure
1. Configure the fat AP:
# Create a WLAN BSS interface.
<AP> system-view
[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Configure a clear type WLAN service template with no authentication.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid service
[AP-wlan-st-1] authentication-method open-system
[AP-wlan-st-1] service-template enable
[AP-wlan-st-1] quit
# Bind WLAN-Radio 2/0 to service template 1 and WLAN-BSS 1.
[AP] interface WLAN-Radio 2/0
[AP-WLAN-Radio2/0] radio-type dot11gn
[AP-WLAN-Radio2/0] service-template 1 interface WLAN-BSS 1
2. Verify the configuration:
{ The clients can associate with the APs and access the WLAN.
{ You can use the display wlan client verbose command to view the online clients. The command
output displays the 802.11n client information.
LAN Segment