R2511-HP MSR Router Series WLAN Configuration Guide(V5)

32
Ste
p
Command Remarks
4. Set the scan type.
scan type { active | passive }
Optional.
By default, the scan type is passive.
5. Set the scan report interval.
scan report-interval seconds
Optional.
By default, the scan report interval
is 10 seconds.
6. Configure only non-dot11h
channels to be scanned.
autochannel-set avoid-dot11h
Optional.
By default, the default setting of the
command depends on the scan
channel command.
Displaying and maintaining WLAN RRM
Task Command Remarks
Display WLAN RRM information.
display wlan rrm [ | { begin |
exclude | include }
regular-expression ]
Available in any view.