R2511-HP MSR Router Series WLAN Configuration Guide(V5)

36
• 802.11i IEEE Standard for Information technology—Telecommunications and information exchange
between systems—Local and metropolitan area networks—Specific requirements
Configuring WLAN security
Configuration task list
To configure WLAN security in a service template, map the service template to a radio policy, and add
radios to the radio policy. The SSID name, advertisement setting (beaconing), and encryption settings
are configured in the service template. You can configure an SSID to support any combination of WPA,
RSN, and Pre-RSN clients
Task Remarks
Enabling an authentication method Required
Configuring the PTK lifetime Optional
Configuring the GTK rekey method Optional
Configuring security IE Required
Configuring cipher suite Required
Configuring port security Optional
Enabling an authentication method
You can enable open system or shared key authentication or both.
To enable an authentication method:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter WLAN service template
view.
wlan service-template
service-template-number crypto
N/A
3. Enable the authentication
method.
authentication-method
{ open-system | shared-key }
Optional.
By default, open system
authentication is adopted.
• The shared-key authentication
can be adopted only when
WEP encryption is used, and
you must configure the
authentication-method
shared-key command.
• For RSN and WPA, the
authentication method must be
open system authentication.