R2511-HP MSR Router Series WLAN Configuration Guide(V5)

41
Ste
p
Command Remarks
3. Enable 802.11 key
negotiation.
port-security tx-key-type 11key
By default, 802.11 key negotiation
is not enabled.
4. Configure the pre-shared key.
port-security preshared-key
{ pass-phrase | raw-key } [ cipher
| simple ] key
By default, no pre-shared key is
configured.
5. Enable the PSK port security
mode.
port-security port-mode psk
N/A
Configuring 802.1X authentication
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter WLAN-BSS interface
view.
interface wlan-bss
interface-number
N/A
3. Enable 802.11 key
negotiation.
port-security tx-key-type 11key
By default, 802.11 key
negotiation is not enabled.
4. Enable the 802.1X port
security mode.
port-security port-mode
userlogin-secure-ext
N/A
Configuring MAC address authentication
802.11i does not support MAC address authentication.
To configure MAC address authentication:
Ste
p
Command
1. Enter system view.
system-view
2. Enter WLAN-BSS interface view.
interface wlan-bss interface-number
3. Enable MAC port security mode.
port-security port-mode mac-authentication
Configuring PSK and MAC address authentication
For more information about port security configuration commands, see Security Configuration Guide.
To configure PSK and MAC address authentication:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter WLAN-BSS interface
view.
interface wlan-bss
interface-number
N/A
3. Enable 802.11 key
negotiation.
port-security tx-key-type 11key
By default, 802.11 key negotiation
is not enabled.
4. Enable the PSK and MAC port
security mode.
port-security port-mode
mac-and-psk
N/A