R2511-HP MSR Router Series WLAN Configuration Guide(V5)

46
b. Select User > All Access Users from the navigation tree to enter the user page.
c. Click Add.
d. On the page that appears, enter username 00146c8a43ff, set the account name and
password both to 00146c8a43ff, select the service mac, and click Apply.
Figure 17 Adding an account
Verifying the configuration
• After the client passes the MAC address authentication, the client can associate with the AP and
access the WLAN.
• You can use the display wlan client command, the display connection command, and the display
mac-authentication command to view the online clients.
802.1X authentication configuration example
Network requirements
As shown in Figure 18, configure the FAT AP to perform 802.1X authentication on the client.
Figure 18 Network diagram
Configuration procedure
1. Configure the fat AP:
# Enable port security.
<Sysname> system-view
[Sysname] port-security enable
# Configure the 802.1X authentication mode as EAP.
IP network
L2 switch
FAT AP
Client
10.18.1.88/24
RADIUS server
10.18.1.1/24