R2511-HP MSR Router Series WLAN Configuration Guide(V5)

59
Task Command Remarks
Display white list entries.
display wlan whitelist [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Clear dynamic blacklist entries.
reset wlan dynamic-blacklist
{ mac-address mac-address | all }
Available in user view.
WLAN IDS configuration examples
WLAN IDS configuration example
Network requirements
As shown in Figure 23, WLAN IDS allows Client 1 (MAC address 000f-e215-1515), Client 2 (MAC
address 000f-e215-1530) and Client 3 (MAC address 000f-e213-1235) to access the fat AP. Configure
the operating mode of the fat AP as hybrid to enable it to provide WLAN access services and detect
rogue clients in the network.
Figure 23 Network diagram
Configuration procedure
# Create a WLAN ESS interface.
<AP> system-view
[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Create service template 1 of clear type, configure its SSID as service.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid service
[AP-wlan-st-1] authentication-method open-system
[AP-wlan-st-1] service-template enable
[AP-wlan-st-1] quit