HP MSR1000 & MSR2000 Router Series Telecommunications & Certification Manual

10
New Zealand – Interface Compliance
Configuring the ADSL2+ interface for the first time
If you are using the SIC-1ADSL module in New Zealand, please do the following to install and configure
the router:
Follow the installation instructions provided with the router.
On a computer that is connected to the router via the console port type the following:
System <cr>
ACL number 2000<cr>
rule permit<cr>
quit<cr>
interface virtual-template 1<cr>
ppp pap local-user username@domain name password simple password<cr>
ip address ppp-negotiate<cr>
nat outbound 2000<cr>
quit<cr>
Interface ATM 2/0 <cr>
PVC 0/100<cr>
encapsulation aal5mux<cr>
map ppp virtual-template 1<cr>
ctrl-z
save<cr>
y<cr>
<cr>