HP MSR2000 Router Series Installation Guide

11
Mounting the router to a rack
Rack-mounting clearance requirements
Figure 5 MSR2003 rack-mounting clearance requirement
Table 6 Rack-mounting clearance requirements
Model Router dimensions
Re
q
uirements for the rack
MSR2003
• Height—44.2 mm (1.74 in) (1 RU)
• Width—360 mm (14.17 in)
• Total depth—423.5 mm (16.67 in)
{ 303.5 mm (11.95 in) for the chassis
{ 60 mm (2.36 in) for connecting an AC
power cord
{ 60 mm (2.36 in) for connecting an E1
cable
• Depth—A minimum of 0.5 m (1.64 ft)
• Distance from the front post to the front
door—A minimum of 80 mm (3.15 in)
• Distance from the front post to the rear
door—A minimum of 370 mm (14.57 in)
Mounting the router to a rack
W
ARNING!
The mounting brackets can only support the wei
g
ht of the router. To avoid dama
g
e to the router, do not
place any objects on the router.
303.5 mm
(11.95 in)
E1 cable
Mounting
bracket
Power cord
60 mm (2.36 in)
60 mm
(2.36 in)