Manualshelf

HP MSR2000 Router Series Installation Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR2003 AC Router
21222324252627282930
18
Figure 14 Removing the filler panel
Figure 15 Installing a SIC
Installing a DSIC
CAUTION:
DSICs are not hot swappable. Make sure the router is powered off before installing a DSIC.
To install a DSIC:
1. Remove the screws on the filler panel on slot 1 and slot 2 of the router to remove the filler panel.
Figure 16 Removing the filler panel
2. Loosen the captive screws on the slot divider and pull out the slot divider.