HP MSR2000 Router Series Installation Guide

27
• If a CF card is used, verify that the CF card is in position.
• Make sure the installed HMIMs/MIMs are in position.
Powering on the router
1. Turn on the switch of the power supply system for the router.
2. Turn on the switch of the AC or DC power supplies.
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* HP MSR2003 BootWare, Version 1.06 *
* *
****************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
Compiled Date : Feb 17 2013
CPU ID : 0x1
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Flash Size : 2MB
Nand Flash size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/msr2000-cmw710-system-e000603.bin.........................
..Done.
Loading file flash:/msr2000-cmw710-security-e000603.bin...Done.
Loading file flash:/msr2000-cmw710-voice-e000603.bin....Done.
Loading file flash:/msr2000-cmw710-data-e000603.bin....Done.
Loading file flash:/msr2000-cmw710-boot-e000603.bin..............Done.
Image file flash:/msr2000-cmw710-boot-e000603.bin is self-decompressing.......
......Done.
System image is starting...
Line aux0 is available.