4000 Router Series ACL and QoS Command Reference

Field Descri

tion

rule 5 comment This rule is used

on Ethernet 1/1.

Comment of ACL rule 5. This field is not displayed when no comment is

configured.

display packet-filter

Use display packet-filter to display whether an ACL has been successfully applied to an interface for

packet filtering.

Syntax

MSR2000/MSR3000:

display packet-filter interface [ interface-type interface-number ] [ inbound | outbound ]

MSR4000:

display packet-filter { interface [ interface-type interface-number ] [ inbound | outbound ] | interface

vlan-interface vlan-interface-number } [ inbound | outbound ] [ slot slot-number ] }

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface

is specified, the command displays ACL application information on all interfaces for packet filtering.

(MSR2000/MSR3000.)

interface [ interface-type interface-number ]: Specifies an interface by its type and number. VLAN

interfaces are not supported. If no interface is specified, the command displays ACL application

information on all interfaces except VLAN interfaces for packet filtering. (MSR4000.)

interface vlan-interface vlan-interface-number: Specifies a VLAN interface by its number.

inbound: Specifies the inbound direction.

outbound: Specifies the outbound direction.

slot slot-number: Specifies a card by its slot number. If no slot is specified, the command displays ACL

application information on the main board for packet filtering. (MSR4000.)

Usage guidelines

If you specify neither the inbound keyword nor the outbound keyword, the command displays the ACL

application information for both incoming and outgoing packet filtering.

Examples

# Display ACL application information for incoming packet filtering on Ethernet 1/1.

<Sysname> display packet-filter interface ethernet 1/1 inbound

Interface: Ethernet1/1

In-bound policy:

ACL 2001