HP MSR2000/3000/4000 Router Series ACL and QoS Command Reference

37
If-match not protocol ipv6
Classifier: 3 (ID 102)
Operator: AND
Rule(s) :
-none-
# Display the configuration of system-defined traffic class default-class.
<Sysname> display traffic classifier system-defined default-class
System-defined classifier information:
Classifier: default-class (ID 0)
Operator: AND
Rule(s) :
If-match any
Table 14 Command output
Field Descri
p
tion
Classifier Traffic class name and its match criteria.
Operator
Match operator you set for the traffic class. If the operator is AND, the traffic class
matches the packets that match all its match criteria. If the operator is OR, the traffic class
matches the packets that match any of its match criteria.
Rule(s) Match criteria.
if-match
Use if-match to define a match criterion.
Use undo if-match to delete a match criterion.
Syntax
if-match [ not ] match-criteria
undo if-match [ not ] match-criteria
Default
No match criterion is configured.
Views
Traffic class view
Predefined user roles
network-admin
Parameters
not: Matches packets that do not conform to the specified criterion.
match-criteria: Specifies a match criterion. Table 15 sh
ows the available match criteria.