HP MSR2000/3000/4000 Router Series ACL and QoS Command Reference

81
Use undo qos fifo queue-length to restore the default.
Syntax
qos fifo queue-length queue-length
undo qos fifo queue-length
Default
The FIFO queue length is 75.
Views
Interface view
Predefined user roles
network-admin
Parameters
queue-length: Sets the queue length. The value range for this argument is 1 to 1024.
Usage guidelines
You must enable the rate limit function for the queuing function to take effect on a subinterface.
Examples
# Set the FIFO queue length to 100.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] qos fifo queue-length 100
Related commands
display qos queue fifo interface
WFQ commands
display qos queue wfq interface
Use display qos queue wfq interface to display weighted fair queuing (WFQ) configuration and statistics
of an interface or all interfaces.
Syntax
display qos queue wfq interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the WFQ configuration and statistics of all interfaces.