HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

165
main: Specifies the configuration file as the main next-startup configuration file. This is the primary
configuration file that the device attempts to load at startup. If the loading attempt fails, the device tries
the backup next-startup configuration file.
Usage guidelines
On an MSR4000, the startup saved-configuration command applies to both MPUs. To successfully
configure the command, verify that the specified file already exists in the root directory of the storage
medium on both active MPU and standby MPU.
If neither backup nor main is specified, the startup saved-configuration command specifies the main
next-startup configuration file.
Even though the main and backup next-startup configuration files can be the same one, specify them as
separate files for high availability.
The undo startup saved-configuration command changes the file attribute of the main and backup
next-startup configuration files to NULL, but it does not delete the two configuration files.
You can also specify a configuration file as a next startup file when you use the save command to save
the running configuration to it.
Examples
# Specify the main next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ....
... Done!
Related commands
display startup