HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

211
Table 31 Command output
Field Descri
p
tion
Slot No. Slot number of the card.
Board Type Hardware type of the card.
Status
Card status:
• Fault—The card is faulty and cannot start up.
• Normal—The card is operating correctly.
Max Ports Maximum number of ports that the card supports.
# On an MSR4000, display device information.
<Sysname> display device
Slot No. Board Type Status Primary SubSlots
-----------------------------------------------------------------------------
0 MPU-100 Normal Master 0
1 MPU-100 Normal Standby 0
2 SPU-200 Normal N/A 10
The output shows that the device has two MPUs and one interface card. The active MPU is in slot 0, the
standby MPU is in slot 1, and the interface card is in slot 2.
Table 32 Command output
Field Descri
p
tion
Slot No. Slot number of the card.
Board Type Hardware type of the card.
Status
Card status:
• Absent—The slot is not installed with a card.
• Fault—The card is faulty and cannot start up.
• Normal—The card is operating correctly.
• Standby—The card is the standby MPU.
• Master—The card is the active MPU.
SubSlots Maximum number of subcards that the card supports.
display device manuinfo
Use display device manuinfo to display the electronic label information of the device.
Syntax
On an MSR2000 or MSR3000:
display device manuinfo [ slot slot-number ]
On an MSR4000:
display device manuinfo [ slot slot-number [ subslot subslot-number ] ]
Views
Any view