HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

238
Usage guidelines
CAUTION:
• A device reboot can interrupt network services.
• If the main startup software images are corrupted or missing, you must re-specify a set of main startup
software images before using the reboot command to reboot the device. Otherwise, the device canno
t
start up.
For data security, the device does not reboot if you reboot the device while the device is performing file
operations.
If you do not specify the slot-number argument, the command reboots the entire device.
If you specify the slot-number argument but do not specify the subslot-number argument, the command
reboots the specified card.
Examples
# Reboot the device when no configuration change has occurred since the last time you saved the
running configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If any configuration has changed, reboot the device and save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Configuration is saved to flash successfully.
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If any configuration has changed, reboot the device but do not save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:n
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# Reboot the device immediately without performing any software check.
<Sysname> reboot force
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# On an MSR4000, reboot the interface card in slot 2.
<Sysname> reboot slot 2 subslot 2