HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

54
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the Telnet client configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client
The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it
serves as a Telnet client.
Related commands
telnet client source
display user-interface
Use display user-interface to display user line information.
Syntax
display user-interface [ number1 | { aux | console | tty | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user line. It typically starts from 0.
aux: Specifies the AUX line.
console: Specifies the console line.
tty: Specifies the TTY line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line.
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
The following matrix shows the keyword and router compatibility: