HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

96
Task Command Remarks
Unmount a storage medium. umount medium-name
By default, a storage medium is automatically
mounted and in mounted state when connected to
the system.
Setting the operation mode for files and folders
The device supports the following file and folder operation modes:
• alert—The system prompts for confirmation when your operation might cause problems such as file
corruption and data loss. This mode provides an opportunity to cancel a disruptive operation.
• quiet—The system does not prompt for confirmation.
To set the operation mode for files and folders:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Set the operation mode for
files and folders.
file prompt { alert | quiet } The default mode is alert.