HP MSR2000/3000/4000 Router Series High Availability Command Reference

14
Usage guidelines
The DSCP value identifies the packet priority during transmission. A greater DSCP value means a higher
packet priority.
Examples
# Configure the DCSP value for VRRP packets as 30.
<Sysname> system-view
[Sysname] vrrp dscp 30
vrrp mode
Use vrrp mode to specify the operating mode for IPv4 VRRP.
Use undo vrrp mode to restore the default.
Syntax
vrrp mode load-balance
undo vrrp mode
Default
IPv4 VRRP operates in standard mode.
Views
System view
Predefined user roles
network-admin
Parameters
load-balance: Specifies the load balancing mode.
Usage guidelines
After you create IPv4 VRRP groups on the router, you can specify their operating mode by using this
command. All IPv4 VRRP groups on the router operate in the specified mode.
Examples
# Specify the load balancing mode for IPv4 VRRP.
<Sysname> system-view
[Sysname] vrrp mode load-balance
Related commands
display vrrp
vrrp version
Use vrrp version to specify the version of IPv4 VRRP on an interface.
Use undo vrrp version to restore the default.
Syntax
vrrp version version-number
undo vrrp version