HP MSR2000/3000/4000 Router Series High Availability Command Reference

25
Examples
# Display brief information about all IPv6 VRRP groups on the device when VRRP operates in standard
mode.
<Sysname> display vrrp ipv6
IPv6 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 1
Interface VRID State Running Adver Auth Virtual
Pri Timer Type IP
---------------------------------------------------------------------
Eth1/1 1 Master 150 100 None FE80::1
Table 7 Command output (in standard mode)
Field Descri
p
tion
Running Mode VRRP operating mode (standard mode).
Total number of virtual routers Total number of VRRP groups.
Interface Interface where the VRRP group is configured.
VRID Virtual router ID (VRRP group number).
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
• Inactive.
Running Pri
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router’s priority changes when the track entry’s status changes.
Adver Timer VRRP advertisement sending interval in centiseconds.
Auth Type
Authentication type. Only "none" is available, which means no
authentication is required.
Virtual IP Virtual IP address of the VRRP group.
# Display detailed information about all IPv6 VRRP groups on the device when VRRP operates in
standard mode.
<Sysname> display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 2
Interface Ethernet1/1
VRID : 1 Adver Timer : 100
Admin Status : Up State : Master
Config Pri : 150 Running Pri : 150
Preempt Mode : Yes Delay Time : 10
Auth Type : None
Virtual IP : FE80::1
Virtual MAC : 0000-5e00-0201