HP MSR2000/3000/4000 Router Series High Availability Command Reference

27
Field Descri
p
tion
VRRP Track Information
Track entry information. This field is displayed only after you have
configured the vrrp ipv6 vrid track command.
Track Object Track entry which is associated with the VRRP group.
State
Track entry state:
• Negative.
• Positive.
• NotReady.
Pri Reduced
Value by which the priority decreases when the status of the associated
track entry becomes negative.
Switchover
Switchover mode. When the status of the associated track entry becomes
negative, the backup immediately becomes the master.
# Display brief information about all IPv6 VRRP groups on the device when VRRP operates in load
balancing mode.
<Sysname> display vrrp ipv6
IPv6 Virtual Router Information:
Running Mode : Load Balance
Total number of virtual routers : 1
Interface VRID State Running Address Active
Pri
----------------------------------------------------------------------
Eth1/1 1 Master 150 FE80::1 Local
----- VF 1 Active 255 000f-e2ff-4011 Local
Table 9 Command output (in load balancing mode)
Field Descri
p
tion
Running Mode VRRP operating mode (load balancing mode).
Total number of virtual routers Total number of VRRP groups.
Interface Interface where the VRRP group is configured.
VRID Virtual router ID (VRRP group number) or VF ID.
State
• For a VRRP group (when the VRID is a virtual router ID), this field indicates
the state of the router in the VRRP group, including Master, Backup,
Initialize, and Inactive.
• For a VF (when the VRID is a VF ID), this field indicates the state of the VF
in the VRRP group, including Active, Listening, and Initialize.
Running Pri
• For a VRRP group (when the VRID is a virtual router ID), this field indicates
the running priority of the router. When a track entry is associated with a
VRRP group on the router, the router’s priority changes when the track
entry’s status changes.
• For a VF (when the VRID is a VF ID), this field indicates the running
priority of the VF. When a track entry is associated with a VF, the priority
of the VF changes if the state of the monitored track entry changes.