4000 Router Series High Availability Command Reference

Usage guidelines

If no interface or VRRP group is specified, this command clears statistics for all IPv6 VRRP groups. If only

an interface is specified, this command clears statistics for all IPv6 VRRP groups on the specified interface.

If both an interface and an IPv6 VRRP group are specified, this command clears statistics for the specified

IPv6 VRRP group on the specified interface.

Examples

# Clear statistics for all IPv6 VRRP groups on all interfaces.

<Sysname> reset vrrp ipv6 statistics

Related commands

display vrrp ipv6 statistics

vrrp ipv6 dscp

Use vrrp ipv6 dscp to configure a DCSP value for IPv6 VRRP packets.

Use undo vrrp ipv6 dscp to restore the default.

Syntax

vrrp ipv6 dscp dscp-value

undo vrrp ipv6 dscp

Views

System view

Predefined user roles

network-admin

Parameters

dscp-value: Specifies a DSCP value for IPv6 VRRP packets, in the range of 0 to 63. The default is 56.

Usage guidelines

The DSCP value identifies the packet priority during transmission. A greater DSCP value means a higher

packet priority.

Examples

# Configure the DCSP value for IPv6 VRRP packets as 30.

<Sysname> system-view

[Sysname] vrrp ipv6 dscp 30

vrrp ipv6 mode

Use vrrp ipv6 mode to specify the operating mode for IPv6 VRRP.

Use undo vrrp ipv6 mode to restore the default.

Syntax

vrrp ipv6 mode load-balance

undo vrrp ipv6 mode