4000 Router Series High Availability Command Reference

Connect Type: Direct Running Up for: 00:00:15

Hold Time: 2211ms Auth mode: None

Detect Mode: Async Slot: 0

Protocol: OSPFv3

Diag Info: No Diagnostic

Table 15 Command output

Field Descri

tion

Total Session Num Total number of BFD sessions.

Up Session Num Total number of active BFD sessions.

Init Mode BFD operating mode, active or passive.

Session Working Under Ctrl Mode

IPv4/IPv6 BFD session mode:

• Ctrl—Control packet mode.

• Echo—Echo packet mode.

Local Discr/LD Local ID of the session.

Remote Discr/RD Remote ID of the session.

Source IP/SourceAddr Source IP address of the session.

Destination IP/DestAddr Destination IP address of the session.

Session State/State Session state: up or down.

Interface Name of the interface of the session.

Min Tx Inter Minimum transmit interval.

Min Rx Inter Minimum receive interval.

Act Tx Inter Actual transmit interval.

Detect Inter Actual session detection timer.

Rx Count Number of packets received.

Tx Count Number of packets sent.

Hold Time/Holdtime Length of time before session detection timer expires.

Auth mode Session authentication mode (only simple is supported).

Connect Type Connection type of the interface, direct or indirect.

Running up for Time interval for which the session has been up.

Detect Mode

Detection mode:

• Async—Asynchronous mode.

• Demand—Demand mode.

Slot Slot number.

Diag Info Diagnostic information about the session.

reset bfd session statistics

Use reset bfd session statistics to clear the BFD session statistics.