4000 Router Series Interface Module Guide

Figure 101 FIC-2FE panel

The following figure illustrates a FIC-4FE panel.

Figure 102 FIC-4FE panel

The following table describes the LEDs on the FIC-2FE/FIC-4FE panel.

Table 140 LEDs on the FIC-2FE/FIC-4FE panel

LED Descri

tion

LINK

• OFF means no link is present;

• ON means a link is present.

ACT

• OFF means no data is being transmitted or received on the interface.

• Flashing means data is being transmitted and/or received.

Interface cables and the connection methods

For more information about the Ethernet interface cables and the connection methods, see "Ethernet

interface."

FIC-1GBE/FIC-2GBE

Introduction

FIC-1GBE/FIC-2GBE, the 1-port/2-port 10Base-T/100Base-TX/1000Base-T Ethernet electrical interface

module, is used for router-to-LAN communication.

The modules support:

• 100 meters (328.1 ft) of transmission segment over the category-5 twisted-pair cable.

• Operation at 1000 Mbps, 100 Mbps, and 10 Mbps, auto-sensing.

• Half-duplex/full duplex, autosensing

Interface attributes

The following table describes the interface attributes of the FIC-1GBE/FIC-2GBE:

Table 141 Interface attributes of the FIC-1GBE/FIC-2GBE

Attribute FIC-1GBE

FIC-2GBE

Connector RJ-45