4000 Router Series Interface Module Guide

126

Interface cables and the connection methods

For more information about 24FXS interface cables and the connection methods, see "24FXS interface."

FIC-2VE1

Introduction

2-port E1 voice interface module (FIC-2VE1) can handle dense voice signals in VoIP system. It provides

two CE1/PRI/R2 ports, allowing the access of 60 channels of voice signals.

Interface attributes

The interface attributes of FIC-2VE1 are shown in the following table.

Table 182 Interface attributes of FIC-2VE1

Attribute Descri

tion

Connector D15

Number of connectors 2

Operating mode

CE1

ISDN PRI

Interface rate 2.048 Mbps

Cable

• E1 75-ohm unbalanced twisted pair cable

• E1 120-ohm balanced twisted pair cable

• Coaxial connector, network connector, 75-to-120-ohm adapter

(with BNC connector)

Supported service

• R2 signaling

• DSS1 signaling

• IP Fax

• General VoIP features in Comware

Interface LEDs

FIC-2VE1 panel is shown in the following figure:

Figure 132 FIC-2VE1 panel

Description for the LEDs on FIC-2VE1 panel is shown in the following table: