HP MSR2000/3000/4000 Router Series Interface Module Guide

155
Product
number
Cable Appearance
Applicable
models
-
Straight-throu
gh cable
1 x RJ45 < ---- > 1 x RJ45
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
JD641A
Dumb
terminal
adapter
cable
1 x RJ45 (female) < ---- > 1 x RJ45 (male)
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
JD508A AUX cable
1 x D25 & 1 x D9 < ---- > 1 x RJ45
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
JD636A
Dumb
terminal
adapter
1 x D25 < ---- > 1 x RJ45
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
Connecting a SIC-8AS/SIC-16AS interface module
To connect the SIC-8AS interface module, connect the D60 connector of the 8-port asynchronous serial
port adapter cable to the SIC-8AS interface module.
To connect the SIC-16AS interface module, connect the D28 connector of the 4-port asynchronous serial
port adapter cable to the SIC-16AS interface module, which allows up to four such cables.
Choose the cable connection type according to the remote device type:
• If the remote device connector is a RJ45 connector, connect it to the RJ45 interface of the
asynchronous serial port adapter cable by a straight-through cable. The sequence is shown in the
following figure: