4000 Router Series Interface Module Guide

157

Figure 145 Connecting a modem

Connecting a MIM-8ASE/MIM-16ASE/FIC-8ASE/FIC-16ASE interface module

ARNING!

To avoid damage to the device and the ports, do not plug or unplug the MIM-8ASE/MIM-16ASE module

interface cable when the router is powered on.

CAUTION:

To avoid damages to the interface module or the chassis, make sure that you insert the cable into the ri

interface.

Choose the cable connection type according to the remote device type:

• If the remote device is a telecommunications device with an RJ45 interface, connect it with the RJ45

interface of the MIM-8ASE/MIM-16ASE/FIC-8ASE/FIC-16ASE interface module by a

straight-through cable. The sequence is shown in the following figure:

Figure 146 Connecting a telecommunications device

• If the remote device is a bank dumb terminal device, connect the RJ45 connector (male) on one end

of the dumb terminal cable to the RJ45 interface on the

MIM-8ASE/MIM-16ASE/FIC-8ASE/FIC-16ASE interface module. Connect the RJ45 connector

(female) on the other end of the dumb terminal cable to the RJ45 interface on one end of the dumb

terminal adapter by a straight-through cable. The other end of the dumb terminal adapter is a D25