HP MSR2000/3000/4000 Router Series Interface Module Guide

163
BSV/BSE interface
BSV/BSE interface cable appearance and applicable models
Table 213 BSV/BSE interface cable appearance and applicable models
Cable Appearance
Applicable
models
ISDN
S/T
interface
standard
cable
1 x RJ45 < ---- > 1 x RJ45
SIC-1BSV
SIC-2BSV
MIM-4BSV
FIC-4BSE
ISDN
S/T
interface
crossover
cable
1 x RJ45 (female) < ---- > 1 x RJ45 (male)
SIC-1BSV
SIC-2BSV
MIM-4BSV
Connecting a SIC-1BSV/SIC-2BSV/MIM-4BSV interface module cable
BSV interface supports the User and Network working modes. The BSV interface works in User mode
when connecting to an ISDN network, or works in Network mode when connecting to TE devices such
as the digital telephones or the BSV interfaces working in User mode.
Choose the cable connection type according to the working mode:
• When the BSV interface works in User mode, choose the connection method according to the type
of the cable provided by the service provider:
1. If the service provider provides an ISDN U interface cable, you must use an NT1 device for
adaptation. Connect one end of the standard ISDN S/T interface cable to the RJ45 interface of the
BSV interface module. Connect the other end of the standard ISDN S/T interface cable to the S/T
interface of the NT1 device. Connect the ISDN U interface cable to the U interface on the NT1
device.
Figure 152 Connecting a service provider U interface cable to a BSV interface module