4000 Router Series Interface Module Guide

LED Descri

tion

ACTIVE

• OFF means no data is being transmitted or received;

• Flashing means data is being received or/and transmitted.

Interface cables and the connection methods

For more information about the Ethernet interface cables and the connection methods, see "Ethernet

interface."

MIM-2GBE

Introduction

2-port 10Base-T/100Base-TX/1000Base-T Ethernet electrical interface module serve to complete the

communication between a router and a LAN.

The GBE (Gigabit Ethernet) supports:

• Transmission distance up to 100 meters over the category 5 twisted-pair cable;

• Operating speeds of 1000 Mbps, 100 Mbps, and 10 Mbps, as well as auto-sensing;

• Half-duplex/full duplex, autosensing

Interface attributes

The interface attributes of MIM-2GBE are shown in the following table:

Table 62 Interface attributes of MIM-2GBE

Attribute Descri

tion

Connector RJ-45

Number of connectors 2

Interface type MDI/MDIX

Interface standard 802.3, 802.3u, 802.3ab

Cable type Ethernet cable

Operating mode

10/100/1000 Mbps auto-sensing

Half-duplex/full duplex, autosensing

Interface LEDs

Figure 41 MIM-2GBE

The following table describes the LEDs on the MIM-2GBE panel.

Table 63 Description for the LEDs on the MIM-2GBE panel

LED Descri

tion

LINK

• OFF means no link is present;

• ON means a link is present.