4000 Router Series Interface Module Guide

Attribute

Description

MIM-8ASE module MIM-16ASE module

Connector RJ-45

Number of connectors

8 (MIM-8ASE)

16 (MIM-16ASE)

Interface standard and operating

mode

RS232

Cable

• AUX cable

• Ethernet straight-through cable

• MIM-8ASE/MIM-16ASE dumb terminal cable

Minimum baud rate (bps) 300

Maximum baud rate (bps) 115.2 k

Service supported

• Dialup through Modem

• Backup

• Terminal access service

• Asynchronous leased line service

Interface LEDs

MIM-8ASE panel is shown in the following figure:

Figure 61 MIM-8ASE panel

MIM-16ASE panel is shown in the following figure:

Figure 62 MIM-16ASE panel

Each channel on MIM-8ASE/MIM-16ASE has only one LED. The following table describes the LEDs on

the panel.

Table 89 Description for the LEDs on the MIM-8ASE/MIM-16ASE panel

LED Descri

tion

LINK

• OFF means no link is present;

• ON means a link is present.

ACTIVE

• OFF means no data is being transmitted or received.

• Flashing means data is being transmitted or received.